 V86 VHF 7 Watt Hand Held Radio |
Price Includes:
-
Radio
-
BP-298 Battery Pack
-
BC-240 Desktop Charger
-
BC-242 AC Adapter
-
MB-124 Belt Clip
-
Antenna
-
1 Year Factory Warranty on Radio
-
1 Year Factory Warranty on Battery, Charger, Antenna & Accessories
7 W Output Power and 1500 mW Audio
7 W output power plus new antenna provides 1.5 times* more coverage
*Wide open space
* Approximately, compared to 5.5 W radio (IC-V80). Wide open space. Communication range may differ depending on operating environment or weather conditions, etc. 7 W output power is only for the IC-V86.
More audio, 1500 mW audio output
1500 mW powerful audio
IP54 and MIL-STD 810G; rugged design against dust, water,
vibration and shock. Perfect for outdoor use.
19 hours* of long lasting battery life
* EX Hi power with BP-298. TX : RX : standby = 5 : 5 : 90 (3 sec. : 3 sec. : 54 sec. ) (The Power Save function is set to "P–S.16")
Durable BNC type antenna connector
Made in Japan quality and reliability
Other Features
-
User selectable Volume Level, VFO/Memory Channel selection control
-
Supplied BC-240, battery charger with a charging control function that prolongs the life of the battery
-
Integrated VOX function
-
200 memory channels, 1 Call channel and 6 scan edges
-
Built-in CTCSS and DTCS encoder/decoder and Tone Scan
-
Priority, program, memory, skip and tone scanning
Supplied accessories
-
BP-298 battery pack
-
BC-240 Desktop charger
-
BC-242 AC adapter
-
MB-124 belt clip
-
Antenna
General
|
|
IC-V86
|
Frequency range
(Guaranteed range) |
TX: 144–148 MHz
RX: 136–174 MHz
|
|
Type of emissions |
F2D, F3E (FM, FM-N)
|
|
Number of channels |
207 channels (200 memory channels, 1 call channel and 6 scan edges)
|
|
Antenna impedance |
50Ω
|
|
Power supply requirement |
7.5V DC
|
|
Operating temperature range |
–20 ˚C to +60 ˚C, –4 °F to +140 °F
|
|
Frequency stability |
±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F)
|
|
Current drain |
TX
(EX Hi/Hi/Mid/Low) |
1.6/1.4/1.0/0.5 A typical |
RX
(Max. audio) |
450 mA typ. (INT SP),
200 mA typ. (EXT SP)
|
Dimensions (W×H×D)
(Projections not included) |
58.6 × 112 × 30.5 mm,
2.3 × 4.4 × 1.2 in
(with BP-298)
|
|
Weight (Approximate) |
300 g, 10.6 oz
(with BP-298, FA-B57V)
|
Transmitter
|
|
IC-V86
|
|
Output power |
7.0/5.5/2.5/0.5 W
(EX Hi/Hi/Mid/Low)
|
|
Maximum frequency deviation |
±5.0 kHz/±2.5 kHz (Wide/Narrow)
|
|
Spurious emissions |
Less than –60 dB
|
|
External microphone connector |
3-conductor 2.5 (d) mm (1/10")/2.2 kΩ
|
Receiver
|
|
IC-V86
|
|
Sensitivity |
–124 dBm typical
|
|
Squelch sensitivity |
–126 dBm typical
|
|
Selectivity (Wide/Narrow) |
75 dB typical/
70 dB typical
|
|
Intermodulation |
65 dB typical
|
|
Audio output power |
Internal SP |
1500 mW typical (with 8 Ω load)
|
|
External SP |
550 mW typical (with 8 Ω load)
|
|
External speaker connector |
3-conductor 3.5(d)mm (1/8″)/8Ω
|
Applicable U.S. Military Specifications
|
Standard |
MIL-810 G
|
|
Method
|
Procedure
|
|
Low Pressure |
500.5 |
I, II |
|
High Temperature |
501.5 |
I, II |
|
Low Temperature |
502.5 |
I, II |
|
Temperature Shock |
503.5 |
I-C |
|
Solar Radiation |
505.5 |
I |
|
Rain Blowing/Drip |
506.5 |
I, III |
|
Humidity |
507.5 |
II |
|
Salt Fog |
509.5 |
– |
|
Dust Blowing |
510.5 |
I |
|
Vibration |
514.6 |
I |
|
Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
|
Ingress Protection Standard |
|
Dust and Water |
IP54 (Dust-protection, water resistance) |
